Don't allow lhbm enable under specific fps, such 48hz.
If enable lhbm when fps is 48hz, screen will flicker due to
hardware limitation.
So check fps value before enable lhbm.
refer to https://gerrit.mot.com/#/c/2383010/
Change-Id: I0c9b6bc3a42c7eb83c0df73c9453892098e9c0cf
Signed-off-by: tinno64 <tinno64@motorola.com>
Reviewed-on: https://gerrit.mot.com/2616578
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
1.send cmd with async mode to switch fps
2.start to update timing when get TE signal
refer to https://gerrit.mot.com/#/c/2405274/
Change-Id: I027ac0c07fc6eb8a49a4072ad65aeac5f6de4289
Signed-off-by: tinno64 <tinno64@motorola.com>
Reviewed-on: https://gerrit.mot.com/2603801
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
When panel resume ,HWC will set the fps from the last suspend to panel.
If the panel is not the fps from init code.
We will set the right fps with dsi_panel_dfps_send_cmd().
refer to https://gerrit.mot.com/#/c/2386399/https://gerrit.mot.com/#/c/2419816/
Change-Id: I5a5b7d07daa1806852be69923e6f0993f07e2640
Signed-off-by: tinno64 <tinno64@motorola.com>
Reviewed-on: https://gerrit.mot.com/2603896
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Some panels need send command to DDIC.
That TP can get the current refresh rate.
Or Switch GAMMA for OLED.
refer to https://gerrit.mot.com/#/c/2340396/
Change-Id: Ie2d35432173a5c28608364ef1523f228bd9546f5
Signed-off-by: tinno64 <tinno64@motorola.com>
Reviewed-on: https://gerrit.mot.com/2603583
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key
For bangkok, there is a threshold that swith hybird mode to DC mode.
When backight is not large than this threshold, we must set the register(0x51)
to the threshold, let backlight enter DC mode.
Change-Id: I0aecbb42c9046a10bd1e907f9e6508d5687503dd
Signed-off-by: tinno64 <tinno64@motorola.com>
Reviewed-on: https://gerrit.mot.com/2550939
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key
pnangn:fix power on/off reset sequence
add power off reset always on and power off pull down
Change-Id: I9eb112f99be8f0fe4eaecb295b8f7d8a5728fd72
Signed-off-by: djw <longc143@motorola.com>
Reviewed-on: https://gerrit.mot.com/2380613
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jing Hu <hujing3@lenovo.com>
Reviewed-by: Dezhen Hou <houdz1@motorola.com>
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key
some product use 51 cmd to support HBM,
shouldn't reset brightness when hbm on
Change-Id: Ia2db13dfc3f131f9137bbb6f9ee6cd80406b7a8f
Signed-off-by: hujing3 <hujing3@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2376249
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key
DC mode will not be set properly if sde_kms_set_panel_feature does
not return error value when it fails.
Change-Id: I49d38a22f4c78406085888a07cf71dc056223651
Reviewed-on: https://gerrit.mot.com/2362283
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Reviewed-by: Dezhen Hou <houdz1@motorola.com>
Submit-Approved: Jira Key
drm/msm:
add delay between mipi0 to reset0 when power off
Change-Id: I16e754492482abf64551471bbaac7574685267a8
Reviewed-on: https://gerrit.mot.com/2300466
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
msm/drm:
Use drm ioctl to set panel feature, avoid panel features
are not set instantly.
Change-Id: I6779c3b665f4b887a00cf41bb818ae03917755ac
Signed-off-by: wangyq13 <wangyq13@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2270744
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Dezhen Hou <houdz1@motorola.com>
Submit-Approved: Jira Key
sometimes,finger unlock, turn on FOD HBM first, and the
turn on the backlight, this caused the restore '0' brightness
that screen can not be turned on.
Change-Id: I450373a5b50d30e2147a0a6534bdec007a12b60f
Signed-off-by: tanhua1 <tanhua1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2274898
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Dezhen Hou <houdz1@motorola.com>
Submit-Approved: Jira Key
The configuration of the mask aplha of the local hbm
is based on the DBV level to ensure that the brightness
of local hbm on or off is consistent.
Change-Id: I68a7a233a27549db0582a6f07d7a421ed400f3d2
Signed-off-by: tanhua1 <tanhua1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2238455
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Submit-Approved: Jira Key
Some project need to change the strength volue of phy,
to fix the RF issue.So we can define the strength at the panel dtsi file.
Change-Id: I9b3fb6e741798ac6ef5ec3921875a9975ce88e9f
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2160545
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
When shut down phone, it will call shutdown function to shut down device.
That can meet the power down timing requirements of panel.
Change-Id: If5f5eb57934559d8c6aa979431d434bf89d33de9
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2063775
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
New added backlight wled driver uses ko, it is not be loaded at
recovery mode. If new added backlight driver uses same backlight type
as panel0-backlight, system will call panel0-backlight when ko is not
loaded, but panel0-backlight is a logical device, cause system dead.
Change-Id: I0c03905c116aae2f42e5ca11edd89035b0cadf33
Signed-off-by: wangyq13 <wangyq13@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1653756
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jing Hu <hujing3@lenovo.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Signed-off-by: tanhua1 <tanhua1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1949836
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Reviewed-on: https://gerrit.mot.com/2046088
Reviewed-by: Zhihong Kang <kangzh@motorola.com>
hange the default output voltage through I2C bus at XBL. And store the default
value to EEPROM. So we can nod make I2C operation at kernel.
Only pull up/down gpio to enable/disable regulator.
So use gpio regulator to control avee and avdd.
Change-Id: I5c9381c8304f0928ff215ac109c72eeda286cb00
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2020983
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
For cypfq, we will set the backlight to max with dcs command.
And pull up hbm_en gpio to set the max current to 25mA.
Change-Id: I07885a122a9efc73e3f1191fa2465c0721ab9ec1
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2007805
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Some panel IC can not support 0x0b for compress pixel stream's DataType.
For example gc7372, it will use 0x3E for compress pixel stream's DataType.
Change-Id: Ie9bc90d79b11033414658d93e0b39137c6f4f8e0
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1976131
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
This reverts commit 98f75f797773394bdb81969aa795d3eeb68642ad.
Mot-CRs-fixed: (CR)
MIPI_DCS_READ_MEMORY_CONTINUE =0x3E
MIPI_DCS_READ_MEMORY_START =0x2C
These commands for page 0 is MIPI DCS commands.
But For other pages, these commands(0x3E,0x2C) maybe normal register.
So these codes are not right.
And we haven't get the requirement to disable 0x3E and 0x2C, SO we revert
these changes first.
Change-Id: I5e18a5e52420ceb78dc298598b097d70011151dd
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1952409
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Reviewed-by: Shanshan Dai <daiss1@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
The clock and data lanes have a calibration circuitry feature. To offset the drive
strength from the calibrated value in an increasing or decreasing manner, use 6 bit two’s
complement values.
Change-Id: I1cb612b4f62ea6af07165ffd1fb8e15528200e5e
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1850370
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Some panel need send command to DDIC.
That TP can get the current refresh rate.
Change-Id: Iecd1e4675729d1f74461f8d56f8115e4808fa8e2
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1831813
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Shanshan Dai <daiss1@motorola.com>
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Reviewed-by: Dezhen Hou <houdz1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Some panels must let ldo always on.
We must add "qcom,supply-always-on" in "qcom,panel-supply-entry".
Change-Id: I81669aa225df0abde26e407c391c56412ee7a109
Signed-off-by: houdz1 <houdz1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1822732
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Reviewed-by: Shanshan Dai <daiss1@motorola.com>
Tested-by: Jira Key
Submit-Approved: Jira Key
The function is ready for other project.
SO remove "MMI_STOPSHIP"
Change-Id: I33d83dc84641f6765ffd8c39cc4a01d19bcf62f6
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1812530
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Remove MOTO_PANEL_CHECK_TOUCH_STATE, we alway compile this
code. When "tp_state_check_enable" is define at device tree file , then
call "check_state" function to get touch state.
Change-Id: Iccdff4a408eb9ad27b71c8394b4c4a844da7b238
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1793078
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Shanshan Dai <daiss1@motorola.com>
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Submit-Approved: Jira Key
Touch have a feature named "single tap".
1. When the feature enbled, we can not power down panel,
and keep rest signal high.
2. When the feature disabled, the touch state is 0, Instead,
the touch state is 1.
3. Touch driver will call set() function to set the touch state,
And panel driver will call check() function to check state.
Change-Id: I034909007678ae940769ec8e350518185cc5fad3
Signed-off-by: houdz1 <houdz1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1784647
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Reviewed-by: litong <litong20@motorola.com>
Submit-Approved: Jira Key
This reverts commit 2da822bf859e4c166c09706f62292a657273104e.
From Kernel-5.4, Send panel_notify at msm_atomic.c.
So do not add this old notify method.
Mot-CRs-fixed: (CR)
Change-Id: I16778dc0a404b1ab20e59bc73a40d32385bdc01b
Signed-off-by: houdz1 <houdz1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1783211
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
There have few cases which no brightnes when panel on.
Add more backlight logs to debug this issue.
Change-Id: I2c25f15f1617f894ecb84efc7c15340cbfc89ad5
Reviewed-on: https://gerrit.mot.com/1783198
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Reviewed-by: Shuo Yan <shuoyan@motorola.com>
Submit-Approved: Jira Key
HBM 1 and HBM2 are assigned as HBM on.
When HBM is off, the value is HBM off.
Change-Id: Iacf17b60725dfe1d2cc2f7206063b81e2e7e98aa
Reviewed-on: https://gerrit.mot.com/1783197
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Reviewed-by: Shanshan Dai <daiss1@motorola.com>
Submit-Approved: Jira Key
Hardware team required to set ordered DSI driver strength for
different DSI PHY.
Add support to config DSI PHY driver strength from DTSI config.
Change-Id: I60c5ee335c897d3f20dde42114798c15576cf32e
Reviewed-on: https://gerrit.mot.com/1783170
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Reviewed-by: Shanshan Dai <daiss1@motorola.com>
Submit-Approved: Jira Key
