As moto standard,the vbatt-cutoff should be 3400mv,
But the cw2217 fg's algorithm,it will retain up to 1% of capacity,
and if a case of long-term heavy load discharge, the shutdown voltage
will also be increased.
the current parameter of vbatt-cutoff is 3400mv, but
From the past test data. the minimun vbatt-cutoff is 3460.
so we have to discrease the vbatt-curoff voltage.
Change-Id: I5c28c50565d215cb5984f1976e139c13b9458f11
Signed-off-by: liuyc20 <liuyc20@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2117156
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
- Set the IRQ for mcd with ID 472 to request interrupt.
- Use RPM_SMD_CE1_CLK as system clock.
Change-Id: I03dc6fa7ac1a47aad6a6fa9ca09d14838edcd56c
Signed-off-by: linyx10 <linyx10@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2129253
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Binsheng Que <quebs2@motorola.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
The output voltage(3V8) of gpio8 power by VPH_PWR to control LED
is different from that of cypfq(1V8) power by VDD_MSM_IO.
So change power source to VDD_MSM_IO.
Change-Id: Ibde8ee7af30a3f80499ef71309e1cd62b1d2e577
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2124713
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
1.As ic spec, the bq2589x i2c addr should be 0x6A.
2.there is no pull-up resistor to the board.
pull-up this gpio12 by dts config.
Change-Id: I0b850f6166d2b2966480dc3bc3266ffa03b0ef38
Signed-off-by: liuyc20 <liuyc20@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2124249
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
rhodep camera use new power IC et5907,
add et5907 config files.
Change-Id: I79f4b386c6031b251ad60dbe3651527cdef644b6
Signed-off-by: Xiaofeng Wang <wangxf32@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2116822
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Long Cheng <chengl1@motorola.com>
Reviewed-by: Xingyun Fu <fuxy7@motorola.com>
Reviewed-by: Shuo Wang <wangsh18@motorola.com>
Reviewed-by: <liuzy55@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
According to the change of hardware design, update the device tree
for DVT2
Change-Id: I9a9eee45313c36e755b8350d2bc767f5a40d1a9b
Signed-off-by: wangxf14 <wangxf14@motorola.com>
Reviewed-on: https://gerrit.mot.com/2121910
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Minghui Wei <weimh1@motorola.com>
Reviewed-by: Xiaojun Ji <jixj@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
As moto standary,the vbatt-cutoff modify to 3400mv
and the ui_soc 100% should be 97% of full capacity, refs to battery soc data,
when charger current is 400mA show the ui_soc 100%
Change-Id: Icca0a96d6a3556b4e046a323ecaa095a79b6d066
Signed-off-by: liuyc20 <liuyc20@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2121340
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
base on qc/LA.UM.9.16.r1-08300-MANNAR.QSSI12.0
qcom modify the dai_mis2 config.
Change-Id: I915525761a0a4d272475de339444bfb28c95a3f8
Signed-off-by: liaohj <liaohj@lenovo.com>
Config the thermal NTC for Rhode5G Plus.
According to the GPIO mapping table.
Change-Id: I46334dba664d47620636f1495a198f579422d3d4
Reviewed-on: https://gerrit.mot.com/2115820
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
override_x1 from 0x85 to 0x25,
set pre-emphasis level to HIGHEST & Hs transmitter pre-emphasis
duration control to short pre-emphasis, the test report is better.
Change-Id: Ia21cd07fc1ca0783f33d00e3c615957a9fb2daac
Signed-off-by: liuyc20 <liuyc20@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2114240
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Add "mmi_annotate" node to driver work well and annotate info can
be appended into last kmsg.
Change-Id: Iced0f40fb1f87cb3bfe42bdb58e6c7b09df9525a
Reviewed-on: https://gerrit.mot.com/2113207
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Hongshu Lou <louhs1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
As DVT1 HW design, milanf GPIO58 load to electric leakage. So need
to config GPIO58 to input and pull down. Don't need to use GPIO58
to control sgm7220 CC_EN pin.
Change-Id: I87c3e216630c7b928a48d96915c74df70be8dabf
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2113378
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Changes:
Create new SW channel ID (retjio) to support
https://idart.mot.com/browse/FEATURE-7403
"retin" remains unchanged.
It is up to India team to decide which SW channel ID
they would l(CR) to launch for India market.
Change-Id: If6d0dfa398fa9106518dd2693917be916a9fc610
Signed-off-by: zhengyd2 <zhengyd2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2109585
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jinxuan Cui <cuijx1@lenovo.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
refs to:https://gerrit.mot.com/#/c/2111857/
the extcon config to discrete-rt-pd-manage.dtsi
we had include it. no need overlay it.
Change-Id: Id7b8484af4a305c5760cfe188c4a2b354fcc005b
Signed-off-by: liuyc20 <liuyc20@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2111861
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
tcpc_config.dtsi config use for config rt1711h device.
if project have no PD device, we should not include tcpc_config.dtsi.
and extcon is for rt-pd-manage struct,
so move extcon config to discrete-rt-pd-manage.dtsi.
Change-Id: Ib82b796b657071c6a93adf9e7440b463fff83c95
Signed-off-by: liuyc20 <liuyc20@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2111857
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
