Some 3rd charger support PD and HVDCP. The charger will send pd reset
when detect hvdcp and only send fixed pdo to AP. So don't detect HVDCP
when pd active.
Change-Id: I820f7ac1018d65ef02cf242ccabb2e8539c67f87
Signed-off-by: Haijian Ma <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2281956
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
For 2nd charger IC(SC89890H), we found that it will take about
100ms to boost voltage. So we have to increase delay time to
wait boost voltage stable.
Change-Id: Icae4af50141188dfb89fefb5d1f1c0c75ae454ee
Reviewed-on: https://gerrit.mot.com/2283852
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Before read touch report data from touch IC when in easy wakeup state,
wait for I2C bus controller to wake or I2C communication will fail.
Change-Id: I8e33fac59b089f46bd71c2361ca7396d1ae8ac5b
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2282270
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: litong <litong20@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
In order to be compatible with more 3rd PD charger, optimize
PD capacity select algorithm.
Change-Id: Ieab59321a9ca300bb1e12b1f7b6a12d0f4ade707
Signed-off-by: Haijian Ma <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2280621
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
fix issuse:variable 'ret' set but not used
Change-Id: Ib25d5b56f02eb3c5a23e088739b72c44bdb058eb
Signed-off-by: qiurp1 <qiurp1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2282049
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jiyue Cui <cuijy2@lenovo.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
Moto driver module compiled using qcom makefile from 8450/8475/8550 and
it does not support KERNEL_CFLAGS,so in these plaform we use
KBUILD_OPTIONS.
Change-Id: I6dbcf28b194201ac19a40e891683acc667893b34
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2281001
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ping Xiao <xiaoping@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
use boottime
to get timestampe
Change-Id: If5f678b542a4a9b2b46ea5ec6b263510cc16ea94
Signed-off-by: Deng Wei <dengwei1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2279515
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
The issue is HVDCP charger inserted and removed, and then OTG
device can't connected. Because dpdm don't auto reset in bq25890H.
So reset dpdm when charger removed.
Change-Id: I8a145379de10310e02b356c60d1cc25c87e513f8
Signed-off-by: Haijian Ma <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2279387
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Fix for relative positions location. Peek position is farther
from Extended than Compact. Init state can be defined in device
tree to properly initialize GPIOs. Sensors data check became
optionally configurable via device tree property.
Change-Id: I7e31801d86e782e1ac7f5bdd3df0ef6cde7b6b0a
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/2271623
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Sridhar Vashist <svashist@motorola.com>
Reviewed-by: Qing Chang <qing@motorola.com>
Submit-Approved: Jira Key
For the file pointer of psy/wireless/voltage_now, it should be the result
of VOUT value. If we use the result of vbus(from usb/voltage_now), it
could not distinguish between the result from charger out and the one
from wireless out. Meanwhile, the required voltage unit is 0.1mV. So
we should make the result by 10.
Change-Id: Ibf6e657da8bd594985c64cf2aabe004b153e78ea
Reviewed-on: https://gerrit.mot.com/2278185
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
The charger is inserted when usb is host mode, as charging want to
switch dpdm for detecting charger type, urb communicate error.
Change-Id: I938d80bc3428add5a7a1d82d4631cbffdaf1ce71
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2273301
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Support charger power watt uevent to notify BatteryService
the charger power capability.
Filter uevent by uevent message POWER_SUPPLY_POWER_WATT=
to parse the charger power in watt.
Change-Id: I9Montana081355e68b281825476d241f570d3118c5fb
Signed-off-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2276713
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Lift off current touch when suspend in case after resume still receive
last touch data.
Change-Id: I2c7e7824d724534af45d88880d08d314e9e9a23c
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2274865
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: litong <litong20@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
When the chip is blank, the value in ver&id register wiil
be a random value. So we could not judge fw status just
by version. We should also check chip id register. And to
avoid user version fw missing problem, I will check fw
not only in factory mode.
Change-Id: I51269a4489062ebc23beee362aac987bc9da8f49
Reviewed-on: https://gerrit.mot.com/2274673
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Tested-by: Jira Key
Submit-Approved: Jira Key
For cps4019, when there is no fw in chip(blank chip), its version
may be 0xB4B5.0xB6B7. It is larger than normal version number
(for example, 1.2). So fw update judgement should consider this
situation.
Change-Id: I033ab39837f85fab9d1d1e1694d0b3fb972a375d
Reviewed-on: https://gerrit.mot.com/2274466
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
mmi_check_dynamic_device_node() uses of_find_node_by_path() to get device
node so that mmi_device_is_available() can use this node to find where is
"mmi,status".but need use of_node_put() to put this node in there drivers.
So move "mmi_device_is_available()" into "mmi_check_dynamic_device_node()"
and put the device node at the end.
Change-Id: Id42e73b844ef6928ebea673dcd7f9c57c8804f8b
Reviewed-on: https://gerrit.mot.com/2271017
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
of_find_node_by_path() returns a node point with refcount
incremented and need use of_node_put() to decrement refcount
Change-Id: Ib1cbdc4c40b1ea5e9bfc1c5d02ddd231185a42b1
Reviewed-on: https://gerrit.mot.com/2269870
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
Check return of regulator_enable to avoid compile issue
for in some build environment.
Change-Id: I49e64662959c2f5e57909901ae3c373ae57b3e08
Signed-off-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2273786
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
While the quick plug out/in happen, the detection of bc1.2 happens very
early and no irq received even, and it starts detection hvdcp quickly.
So need to handle the special case for hvdcp detected result for bc12
and the subsequent qc3p detection accordingly.
Change-Id: Ic9558b9490963f585163ae29a9903ba6831abddf
Signed-off-by: xieqiong2 <xieqiong2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2273497
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Xu <xuwei9@lenovo.com>
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
Turn off load switch when charger is attached and paired
battery is under charging, but not discharging.
Change-Id: Idbd2824c85a43175b8030eeb2e0af2e7a400f27e
Signed-off-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2273610
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
1. make it compatible with Android S build environment
2. add optional i2c pullup power regulator
3. make battery current polority selectable from DT
4. make the power supply name configurable from DT
5. use battery temperature for battery present detection
Change-Id: I326688b499296e3c99ebde67632af90edac092c1
Signed-off-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2269111
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yuecai Liu <liuyc20@motorola.com>
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Support config different touch report rate by product,
search corresponding report rate command in config struct according to
refresh/interpolation config and then send it to IC.
Change-Id: Ieff127e4b1e6dbb18fdda5deca91972326ebbb9c
Signed-off-by: zhuwg1 <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2258273
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: litong <litong20@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
For wls power off charging, main charger driver will start before
wls charger driver. As a rsult, it could not get wls present status
at the beginning of power off charging. So we should check
wls presentation before USB ICL voting. And set ICL as defined.
Change-Id: Ibc846d907ce2deb85aeb787fcdd7427dd8ebc2e6
Reviewed-on: https://gerrit.mot.com/2272083
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
charging with CDP will stop charge when battery volatge is high
use dynamic vindpm tracking voltage when CDP charging
Change-Id: I31434a85963c605126930a5d0f29dd46eea43b8f
Signed-off-by: longc102 <longc102@motorola.com>
Reviewed-on: https://gerrit.mot.com/2269909
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Qiong Xie <xieq2@motorola.com>
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
New interface to set/get touchscreen active region parameters. This
interface intended for use by Rollable Display HAL
Change-Id: I78e99893ff9b694ea61143e8d79311954840aa6b
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/2237772
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Igor Kovalenko <igork@motorola.com>
Submit-Approved: Jira Key
Added pinctrl state allowing for initial GPIO configuration, e.g.
function, signal strength and pullups. This feature is controlled
via device tree option. Pinctrl state must be called init_state.
Change-Id: I9af30ab15845fb3db122aead96389443b9d6d707
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/2270421
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Igor Kovalenko <igork@motorola.com>
Submit-Approved: Jira Key
Position state machine added. Current position detection will be
attempted on power up. Added sysfs interface for hall effect
sensors data. Added destination position to validate every move.
Defined default stepper sequences for major moves that can be
altered if necessary.
Change-Id: I304c7de05347267f1031fedde9d014779afc933b
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/2256131
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Sridhar Vashist <svashist@motorola.com>
Reviewed-by: Qing Chang <qing@motorola.com>
Submit-Approved: Jira Key
