Main touch uses mmi,supported_gesture_type to indicate which
gesture type is supported,BIT2:BIT1:BIT0 means "double:single:zero".
Change-Id: I17378fccc07df012b448eeebaf26c728bb6163ca
Signed-off-by: Levy Gabriel <levy@motorola.com>
Reviewed-on: https://gerrit.mot.com/2783088
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Bruno Dias <brunorcd@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
The default mode of cabc is UI.
We must set it to UI mode at init code.
Change-Id: I4650bbbbe9ea84f8862b9be3c903220ebe2c8fc1
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2784557
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Zhihong Kang <kangzh@motorola.com>
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key
Add delay time of command 0x10.
That can match the spec.
Change-Id: I1f90c6e5d43166e81248bbbf46f4753441e39c23
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2765837
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
Under the low bringhtness, Switch black picture to white picture,
there are some display flickers.
Change the cabc dimming to fix the issue.
Change-Id: I0298cf765e6b685f3ef045c61ac11586cc601f01
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2763897
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhihong Kang <kangzh@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
When panel power off, tp_cs is high. Then LDO will be pull up by tp_cs.
That ldo can not be pull to low. it do not match the spec.
So Keep ldo always on to fix the issue.
Change-Id: Ifd8941b21aef94a1d29765454749acddfee7fdd4
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2761242
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
As HW require base on HW design, reduce FV to 4490 mv
for avoid vbat out of battery spec.
Change-Id: I40de04b2a2b4e29f1af8cbf6873b7b8821bafaec
Signed-off-by: Haijian Ma <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2752718
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Use Tetras face to support strong face unlock
Need to enlarge the qseecom_ta_mem
removed_mem: removed_region@c0000000 is for the qcom TZ APP memory.
See more details on the qcom case: Case Number: 06762606
Change-Id: Ib1d221c2469fa6a6fdb781ffdafee7cb29def972
Reviewed-on: https://gerrit.mot.com/2703119
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Binsheng Que <quebs2@motorola.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
Reason:
The ocean on the Gaode map is a high saturation map.
After the IC detects the high saturation map,
it will call the high saturation map setting,
causing significant changes in PWM duty,
resulting in significant changes in brightness and darkness
Solution:
Turn off the function of detecting high saturation images (P3_RAFh=18h),
keep the measured PWM duty unchanged.
Change-Id: Idc2592e000822ef1fea554b5fc213a6cc88bcb02
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2745889
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhihong Kang <kangzh@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
Update the source settint of panel.
To fix the flicker issue under the picture with warm color.
Change-Id: Id9b9fba1bb867e1e89b28b728663c85710436682
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2747747
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhihong Kang <kangzh@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
When using a Google Universal 15W type-c Charger,
but the fast charging icon "Turbo" is not displayed.
(Vbus voltage is ~4.91V and the charging current is 2.89A).
So we need to enable setting ICL based on Rp for
Type-C non-compliant legacy cables.
Change-Id: I6e4b9082b861a87250d251dc7fba7274cc0a9907
Signed-off-by: Guocheng Wang <wanggc6@motorola.com>
Reviewed-on: https://gerrit.mot.com/2743079
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
1.remove CABC codes, these codes have been otp by panel vendor.
2.reduce the delay time of 11/29 and 28/10
Change-Id: Ifbbba2785072a4a716db50292fdc593d153f1c39
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2735774
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Zhihong Kang <kangzh@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
For qcom driver, the ldp is enabled by default,but this will cause a lot of irqs
when the phone is sleeping.
And fogos/fogor/fogo not support water detection,so we disable lpd.
Change-Id: I7e24c14b496323a39c5fc3d4ab6b3e780a492ccc
Signed-off-by: Guocheng Wang <wanggc6@motorola.com>
Reviewed-on: https://gerrit.mot.com/2736034
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
For some QC2.0 chargers,such as HW-050450C00, only support
output 5V.
Then if enable hvdcp2-force-9v,the charger will be abnormal and
have no current.
So disable it and reset max icl to 2000mA.
Change-Id: Ie030baef4a5ca3026daf29b60082e5710d0d8b97
Signed-off-by: Guocheng Wang <wanggc6@motorola.com>
Reviewed-on: https://gerrit.mot.com/2736011
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
1.change the reset sequence.
2.change the physical size.
3.change the timing of 11/29.
4.remove the delay time of 10/28
5. add delay time between avee and reset high.
Change-Id: I6d3c84b7afa3de2d2f81f208cbb7502e32b7d6f9
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2726463
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhihong Kang <kangzh@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
