New kernel change some API and we need to make some
change on Ets fps driver to match it.
Change-Id: Ia16be9e8e02f99ebfee723644ed1d98abc6356e0
Signed-off-by: Weilong Wu <wuwl10@motorola.com>
Reviewed-on: https://gerrit.mot.com/1483695
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
-1, tx_mode_reg address is 0x69,
the value of enable is 3, and disable is 0
-2, add TX_RM_POWER_TOGGLE setting in tx_mode
the tx mode will shut itself down whenever OVP or OCP excetion occrs
-3, change SYS_CMD_REG to 0x4e
Change-Id: I15e94cc4f944ef94f60b87c3de1415b397e768ed
Signed-off-by: xuwt2 <xuwt2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1480220
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
The tree modules(p938x, smbcharger-mmi, qpnp-smb5) work
togegher to handle the logic of wireless charging.
In smbcharger-mmi, MMI_HB_VOLTER will hold dc suspend until
heartbeat work detect DC present,
In qpnp-smb5, dcin-plugin irq handle DC present status.
they are all triggered asynchronously in parallel,
and the DC present is always active after p938x VOUT_ON has been set
for a while.
And yet, at this point, smbcharger-mmi's heartbeat work has been
triggered by wireless psy change when p938x is VOUT_ON.
This leads to MMI_HB_VOLTER hold dc suspend in a minute to wait
heartbeat schedule again by itself
Change-Id: Idc8b62fa47975daeba3f0875d7715771fa8141a8
Signed-off-by: xuwt2 <xuwt2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1479568
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Charger driver has a lot of specifics that having a documentation would
heavily support understanding. This is a first version, describing
which DT properties are used by it, as well as explaining the
JEITA/IEEE Thermal Charging Limitation compliance algorithm.
Change-Id: I2418d84378c2430596b0eb6d8456a207860fc09f
Signed-off-by: Cesar Santos <cmsantos@motorola.com>
Reviewed-on: https://gerrit.mot.com/1481730
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Tiago Ganselli <ganselli@motorola.com>
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Original heartbeat delay was 60s, which makes thermal mitigation while
charging too slow. Changing it to 5s makes it notice battery
temperature change and limit charging current and voltage much faster.
Change-Id: Ib43dba3db18f3509afe1ab448d5f35c9bd33a16e
Signed-off-by: Cesar Santos <cmsantos@motorola.com>
Reviewed-on: https://gerrit.mot.com/1483570
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Support new ioctl command and compatibale with old one
Add interrupt control to solve int can not wake up system issue
Change-Id: I3229f343c359ec6075739ea3e2d30554b07052a4
Signed-off-by: Ningkai Zhuang <zhuangnk1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1481162
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
For Kernel-4.19 add some new APIs, Exfat-nofuse need apply some patches,
or compile will fail.
patch list:
f93a47e641e95c8847b0
Change-Id: Ic1737e3ea09ece27fce7cb969b838e50d9569ffe
Reviewed-on: https://gerrit.mot.com/1478458
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Dongliang Yue <yuedl1@motorola.com>
Reviewed-by: Shi-Yong Li <a22381@motorola.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
- Since we noticed that some projects need to report not only one type
of touch gesture and touch hal has been changed on bq branch, so if
we still report instance the single tap should not be work properly. So
add report function key to fit for the hal's change.
Change-Id: I14511e3cb95dfda2f188ad587ffedd300579384a
Signed-off-by: wengjun1 <wengjun1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1477339
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
- Since we noticed that some projects need to report not only one type
of touch gesture and touch hal has been changed on bq branch, so if
we still report instance the single tap should not be work properly. So
add report function key to fit for the hal's change.
Change-Id: I8cf83493db1d1ff20ee40bbd8414f0130d1bde1e
Signed-off-by: wengjun1 <wengjun1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1477814
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
input/himax_v2_mmi:
Add HX83102D driver. HX83102D is different from others, so need
to add CODE_OVERLAY and its own drivers.
The first TP is hx83102D without flash
Change-Id: I68df2f1cc365041367de75ef8b52cecf677c70d0
Reviewed-on: https://gerrit.mot.com/1478452
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Add driver for wl2864c which will be used as camera/glance external
power supply.
Device tree please refer to:
https://gerrit.mot.com/#/c/1477679/4/qcom/lito-nairo-common-overlay-base.dtsi
Change-Id: Ic852a9cfd7c3fcae76d5449cd458363e336eaf20
Signed-off-by: chenglong1 <chenglong1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1477678
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Shenhuai Huang <huangsh4@motorola.com>
Reviewed-by: Long Cheng <chengl1@motorola.com>
Reviewed-by: Wang Liu <liuwang2@lenovo.com>
Reviewed-by: Jian Zhang <zhangjo@motorola.com>
Reviewed-by: Darong Huang <huangdra@motorola.com>
Reviewed-by: Xu Ji <jixu@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Modify driver files and read properity channel number node
Distinguish two channel number or three channel number
Change-Id: I9a00992c9875e94fe00711e92d6f74121327fb6b
Reviewed-on: https://gerrit.mot.com/1478286
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: <honglei.lin@ontim.cn>
Reviewed-by: Jiacheng Ou <oujc1@motorola.com>
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Jianqiu Huang <huangjq9@motorola.com>
Reviewed-by: Lijun Chen <chenlj2@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
This function can fix residual reporting points, if host fails to
read the tp reporting data instantly because the following two
reasons:
1) host lost interrupts
2) host interrupt function process slowly sometimes
Change-Id: Ie914f2b2463309f90ad05b611597e2b1bfe84ca1
Signed-off-by: wangyq13 <wangyq13@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1475055
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jialei Hao <haojl2@motorola.com>
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
TP:
Solve the problem of system crash when
the synaptics touch is shut down.
Change-Id: I2e483d2a1ff27cb5a2607611843c414dddd87fa9
Reviewed-on: https://gerrit.mot.com/1476476
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jialei Hao <haojl2@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
Until now, logic only accepted "Turbo Power" as anything higher than
2500mA, and PD having 15W (9V/1670mA) or 18W (9V/2000mA) would not
trigger such condition, being interpreted as Normal Charger.
New logic adds to Turbo anything higher than 8.5V, so future 12V will
also match such changes.
Change-Id: I3a4ff8eae094869d798f9cb6e4e72f7290cbbbac
Signed-off-by: Cesar Santos <cmsantos@motorola.com>
Reviewed-on: https://gerrit.mot.com/1465382
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Igor Kovalenko <igork@motorola.com>
Submit-Approved: Jira Key
Racer use slg5bm43670 driver, it should be separated from others.
Racer_turbo/Smith use slg51000 folder, and Racer use slg5bm43670 folder.
slg5bm43670 driver is provided by FAE, it has interrupt issue,
it will be fixed by updated driver later.
Change-Id: Ibf87d63d02621bf6fb3dfbd6bc16fa437ef6935f
Signed-off-by: liuwang2 <liuwang2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1476364
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jian Zhang <zhangjo@motorola.com>
Reviewed-by: Long Cheng <chengl1@motorola.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
Default voltages on reset on slg51000 pmic are the expected voltages from
hardware so there is no need for the driver to set the voltage. Set via
device tree bool
Change-Id: I48ed538f0edf4c172a282c166b65fb3b00f3c383
Reviewed-on: https://gerrit.mot.com/1475733
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Rav(CR) Vembu <raviv@motorola.com>
Reviewed-by: Jian Luan <jamesluan@motorola.com>
Submit-Approved: Jira Key
LSI came up with reporting MMI gestures via Gesture Event Type VENDOR
(0x8). Single tap has Gesture Event ID (0x1) and zero tap has Gesture
Event ID (0x2) followed by coordinates values.
Change-Id: I1c3b6e6e96dadd2c7f8281378f7f1257f743a4cd
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1475704
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Add build config option to recalibrate cap sense upon
insertion of USB.
Change-Id: I13b9f9ae71e232d1dbd2cc3de9cb7a683184131c
Signed-off-by: liugy11 <liugy11@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1474494
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jiyue Cui <cuijy2@lenovo.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
TP:
touchscreen_mmi need read device device-tree node.
So must use bus device to register ts_mmi.
Change-Id: I26edf7bb276e8d052bf228d11b2e57abcdb5e359
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1473718
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
TP:
using the touchscreen_class name to
set the samsung touch device name
Change-Id: I45a1e2832a9f9071b009a72e01f6279f214ae6bd
Reviewed-on: https://gerrit.mot.com/1473396
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jialei Hao <haojl2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
TP:
Add get_class_fname methods to get class name
the name is provided to vendor.
Change-Id: I1984af824bb1d59b8d736c59b327619b89bb010b
Reviewed-on: https://gerrit.mot.com/1471685
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jialei Hao <haojl2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Added USB detection to the class code to handle charging source
bit setting.
Change-Id: Ic947504509b454150b7067ceb31786c5d29296b2
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1471999
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jialei Hao <haojl2@motorola.com>
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Add support for USB detection done in touchscren_mmi class code.
Change-Id: I61fbe22a6850baaf8ae5153fd1e283de13aea94f
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1472006
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jialei Hao <haojl2@motorola.com>
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Add sysfs_notify calls to tx_mode changed so that the
hal can poll on the file and push updates to fw.
Add sysfs notify call to rx_connect so the hal can know
when a client has connected via power share
Add sysfs notify call to error count so the fw can notify
users if there is an aligment issue.
Also add some code to read the system mode buffer
instead of blindly overwriting it and due to a bug in the
firmware, tx mode will turn off randomly. The user would
not be aware this happened. Check every 2 seconds if this
happened and re-enable automatically.
Change-Id: Ifadecf5b820fd0a5e6becff1a3a7805a5ec96f00
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1466131
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
There was mixing of memory allocation methods, i.e.
allocating with vzalloc() and trying to free with kfree()
Change-Id: I8ae2627c1bb6431b44311bca093c671df162e91d
Signed-off-by: awhite6 <awhite6@motorola.com>
Reviewed-on: https://gerrit.mot.com/1471259
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
set dc now is only used if there is a user debug flag,
move the function into an ifdef block.
Mot-CRs-fixed: (CR)
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Change-Id: Ia84c24c55e775bea7024dc11974b63226d6c0069
Reviewed-on: https://gerrit.mot.com/1471811
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
TP:
solve the error that the firmware file could not
be found while firmware updating.
Change-Id: I0934c6b564e3208f16113981a7bd9a28da326385
Reviewed-on: https://gerrit.mot.com/1471544
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jialei Hao <haojl2@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
