sd card interrupt level is low as default, need set HIGH as
design on cypfr 5G.
Change-Id: Id83ea14f258e99115d460117ed5633adef11fd21
Reviewed-on: https://gerrit.mot.com/2064765
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xinmin Fu <fuxm1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
When "qcom,tp_state_check_enable" is enabled. and "single tap" is enabled.
That we do not power down panel at panel_power_off() function.
So when shutdown phone, that will not power down panel with right timing.
Change-Id: I324d28719e8dbc18a4975b6e38de4e016c69247f
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2064106
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Panel's bias/bl driver IC use the same I2C bus with sar sensor.
Enter sleep, but Sar sensor is still on work.
So we can not disable I2C gpio when sleep.
Change-Id: Ic44a690ada42491e870648705a887ce928194616
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2063713
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhihong Kang <kangzh@motorola.com>
Reviewed-by: Minghui Wei <weimh1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
As sm4350 pro and sm6375 platform don't support BOB,
so change vbat vut off voltage from 3.2V to 3.4V, and change
vbat empty voltage from 3.0V to 3.2V
Change-Id: I95f010b09f8764c194c757eaad128eb1e8c836b1
Signed-off-by: mahj8 <mahj8@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2063748
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
The panel for cypfr is the similar to cypfq.
So copy the panel configuration form cypfq.
And rename it to cypfr-display.dtsi.aa
Change-Id: I4875682ce67d2f69244ae5543669fb104509e45a
Reviewed-on: https://gerrit.mot.com/2062683
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhihong Kang <kangzh@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
The panel for cypfr is the similar to cypfq.
So copy the panel configuration form cypfq.
And rename it to cypfr-display.dtsi.
Change-Id: Ie54c6a43bb593e41bafdd025462e8f3382651b20
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2062678
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhihong Kang <kangzh@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
As milan 5G use pm6375 gpio8 to control charging led,
so enable leds-indicator-pwm.ko to control led.
Change-Id: Id3287569523ec3d4c7e47299ffcaf7b2a9e91450
Signed-off-by: mahj8 <mahj8@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2055599
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Config max otg out current from 1.5A to 1A for corfu 5g
this requirement come from HW.
Change-Id: I7f618ecde010b3d93e476310d295ef32f2c3791d
Signed-off-by: chailu1 <chailu1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2053064
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
This reverts commit 9308e9c5978282e8b7d2a54cfa76ac34ff4f0a12.
This patch cause panel can't work when flash gki.
So use another method to keep l13 on.
Mot-CRs-fixed: (CR)
Change-Id: I8104732de046f608c0d6d3535f01cab18341f057
Signed-off-by: wangyq13 <wangyq13@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2049630
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
Get require from ODM, need make this change to meet the timing.
When panel suspend, let mipi into ulps mode.
That MIPI signal will be pull down.
Change-Id: I4ddfe06c8e1c8e244fc1191a760bbba935fa2c23
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2046943
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhihong Kang <kangzh@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
1. there are two backlight driver IC(AW99703 and lm3697).
2. on early-init, will insmod these drivers.
Change-Id: Iae8520cc8444ccb71c01951d0f77181c81eb6330
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2045934
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhihong Kang <kangzh@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
For milanf's tianma panel, vsp/vsn = 5.5V .
So we change change the min voltage of vsn/vsp to 5.5V
Change-Id: I35e6df4c7eab48da29a95935478768bac466b55e
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2045709
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhihong Kang <kangzh@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
1.blair-cypfr-common-overlay.dtsi is copied from blair-mtp.dtsi
of date 2021-06-02 17:56:14
2.AAdd NFC initialized config
https://gerrit.mot.com/#/c/2008259/ has removed nfc from base dts,
so add NFC config in blair-cypfr-common-overlay.dtsi just l(CR)
holi-denver-common-overlay.dtsi to avoid build error.
Change-Id: Icbe6ad737473d1e41fddb56d71372399c8082912
Reviewed-on: https://gerrit.mot.com/2045705
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiaofeng Wang <wangxf14@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
sd card interrupt level is low as default, need set HIGH as
design on milan 5G.
Change-Id: If22f53080a564ae7eeae0be2ca5ffe7ad3a1fb46
Reviewed-on: https://gerrit.mot.com/2045887
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xinmin Fu <fuxm1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
