This change is to update QUP clock ON/OFF sequence as per
recommendations. Disable the divider before SE clk off and
then enable it after SE clk ON.
CRs-Fixed: 3071458
Mot-CRs-fixed: (CR)
Change-Id: I5fd82be33d49de7a48159be969910097e88ab255
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Reviewed-on: https://gerrit.mot.com/2216220
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Bin Liu <liubin7@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Ibiza and Denver have some crashes related to memory. We noticed that the
crashes only appeared in build user, as these devices use the same kernel
version, we propagated to the br-4350 branch and we will monitor future issues.
PROPAGATED_from (CR)
In SM7325 platform, there are lots of random crash issues on user build,
and not reproduced in userdebug builds.
in RAMDump file, we can see the memory in kernel was overwritten by TZ logs
the tzlog strings corrupted the memory address to cause abort on VM to PHY-M
similar panic issue was frequently reported in User build which disable
DebugFS along with tzlog driver which depends on DebugFS. Add the tzlog driver
back, but remove the dependency of DebugFS, instead, use ProcFS for output
Change-Id: I6c9bb8e44f77d9f68da8fc1f5e1d57a15666cb13
Signed-off-by: wangwang1 <wangwang1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1836661
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Signed-off-by: xizx <xizx@motorola.com>
Reviewed-on: https://gerrit.mot.com/1961925
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Signed-off-by: Robert Cabral <robertc@motorola.com>
Reviewed-on: https://gerrit.mot.com/2193587
Removing SD card at UEFI/XBL stage can lead to regulator getting turned off
due to MGPI but RPM isn't aware of that.
Kernel comes up with vote_count = 0 and we call enable API but RPM
ignores this thinking that it is already turned on leading the vdd
regulator in OFF state despite our vote.
CMD timeouts are seen in our sd_init path due to this and card detection
fails.
After the first enable vote, send a disable vote followed by re-enable
vote to make the RPM driver consistent with the regulator state.
Change-Id: Ifb761d07f13daa271c10c5454195f9e55ef17833
Signed-off-by: Sarthak Garg <quic_sartgarg@quicinc.com>
Reviewed-on: https://gerrit.mot.com/2193867
Reviewed-by: Chuanchun Zhu <zhucc2@motorola.com>
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
GENI IOs read register - Allows a mean to SW for reading current GENI IOs
DATA might not reflect current bus status due to synchronization delay.
Let's revert it and monitor I2C crash issue some time .
This reverts commit 5ad2f9de06.
Change-Id: Ie4c9788976a0054dc7c945623b4d0562568f331d
Reviewed-on: https://gerrit.mot.com/2180331
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Reviewed-by: Minghui Wei <weimh1@motorola.com>
Submit-Approved: Jira Key
Felica requires also prevent mount external storage to these
paths. The external storage mount is a real block device
instead of bind, so remove the "bind" check.
The secid of "u:r:su:s0" equals "u:r:init:s0" at init first stage,
it will also prevent the init first stage mount, only when current
secid is not same as "u:r:init:s0" and same as "u:r:su:s0", we
prevents the mount.
The below commands should be blocked.
adb shell mount -r -w /dev/block/vold/public:179,1 /system
adb shell mount -r -w /dev/block/vold/public:179,1 /system_ext
adb shell mount -r -w /dev/block/vold/public:179,1 /product
adb shell mount -r -w /dev/block/vold/public:179,1 /vendor
Change-Id: I0e3ca33b0dd4bd67910a9d2296e297cda542016a
Reviewed-on: https://gerrit.mot.com/2177550
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Get filename when begin to check mount path or else
will cause memory leak when return halfway.
Change-Id: I397ee24c63df21d676251d49555d1ca1e0c69e60
Reviewed-on: https://gerrit.mot.com/2176260
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Accordingly to (CR), overall device performance has improved
significantly after disabling PPR (PerProcess Reclaim), mainly on launch
time, major page faults, memory pressure, swap IO, and steals (kswapd,
direct and total steals).
Therefore, PPR should be disabled for this device.
FPS tests results:
http://perf.mot.com/apps/fps/rungraphs/?runids=45049,46182
Change-Id: I8bbccb92a27125b8abaf6f2afe6a3b4a6ec5b074
Reviewed-on: https://gerrit.mot.com/2166482
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Fernanda Schmidt <fschmidt@motorola.com>
Reviewed-by: Rafael Ortolan <rafones@motorola.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
This reverts commit b69bc86c01cef6c6828f5861e3f5e0877505c908.
Freeze feature should be disabled both on upper and lower layers.
Change-Id: Ibaa36bb72ad6219d2699e21b14c2c0a59d94df88
Signed-off-by: Murilo Alves <alvesm@motorola.com>
Reviewed-on: https://gerrit.mot.com/2152151
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiaojun Ji <jixj@motorola.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
This reverts commit ca4dd90f57b3e814a18495205f8823b7b456a70b.
Freeze feature should be disabled both on upper and lower layers.
Change-Id: I649ea96a42f7669103b760f94dec9302480593bd
Signed-off-by: Murilo Alves <alvesm@motorola.com>
Reviewed-on: https://gerrit.mot.com/2152150
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiaojun Ji <jixj@motorola.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
This reverts commit 1d847974a85f6ce044b744a5d3136bbbb75e7c52.
Freeze feature should be disabled both on upper and lower layers.
Change-Id: I499cbe821f419a0251cad3c62c236eea0fb0c87f
Signed-off-by: Murilo Alves <alvesm@motorola.com>
Reviewed-on: https://gerrit.mot.com/2152149
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiaojun Ji <jixj@motorola.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
On Android S, SamSung TW performance is abnormal, after write about 30GB data continually,
the sequent write performance will drop from 450MB/s to 200MB/s.
After switch to WB, the sequent write speed will keep 450MB/s.
Change-Id: I513e6daee45d5ffbdd411fb5d747ccd4f32ca34f
Reviewed-on: https://gerrit.mot.com/2146604
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Accordingly to https://source.android.com/devices/tech/debug/jank_jitter
, CONFIG_HZ value can be changes in order to reduce janks. As the most
of Motorola devices use CONFIG_HZ=300 and Denver uses CONFIG_HZ=250
(check (CR)), changing CONFIG_HZ to 300 is a good call to prevent
janks (mostly for heavy-use cases).
This gerrit makes CONFIG_HZ_300=y, in order to CONFIG_HZ=300.
Change-Id: I82663948f5f01baff7872ba1a8ec1bba3c8f049f
Reviewed-on: https://gerrit.mot.com/2147064
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Fernanda Schmidt <fschmidt@motorola.com>
Reviewed-by: Rafael Ortolan <rafones@motorola.com>
Reviewed-by: Carlos Pinho <cpinho@motorola.com>
Submit-Approved: Jira Key
On Ibiza, accordingly to (CR), overall device
performance has improved when CONFIG_HZ_300 is set to y.
We observed ~17% performance gain on mean launch time.
FPS run with tes results available at:
http://perf.mot.com/apps/fps/rungraphs/?runids=45049,45389
Therefore, CONFIG_HZ_300 should be set to y.
Change-Id: Ib2f958ce7cfa1fb389afd8352447d3a45ae02762
Signed-off-by: Luiz Cressoni <lutcho@motorola.com>
Reviewed-on: https://gerrit.mot.com/2145700
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Pedro Henrique Fonseca Bertoleti <pedrohfb@motorola.com>
Reviewed-by: Rafael Ortolan <rafones@motorola.com>
Reviewed-by: Carlos Pinho <cpinho@motorola.com>
Submit-Approved: Jira Key
camera ois use platform_get_irq_optional.
and this api exists in abi_gki_aarch64.xml.
Change-Id: Ic962a879e7b89510fcff203a0a278843d679bd70
Signed-off-by: liuwang2 <liuwang2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2139758
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
TZ protect gpio45,46,56,57 for NFC SPI,
but the four of them are used for camera sensor power supply.
so we need to saperate them from holi baseline
Change-Id: I67746f299490c56baf1df3e0fa31482362ba9837
Signed-off-by: Xiaofeng Wang <wangxf32@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2131677
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xingyun Fu <fuxy7@motorola.com>
Reviewed-by: Shuo Wang <wangsh18@motorola.com>
Reviewed-by: <weilt2@motorola.com>
Reviewed-by: Long Cheng <chengl1@motorola.com>
Reviewed-by: <liuzy55@motorola.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
Focal_fps_mmi.ko will use strcat to cat version.
we need to add it to abi list to avoid build error on user build.
Change-Id: I2fd3e35faff5c239111d417b5a5d9efd56ebec4b
Signed-off-by: wuwl10 <wuwl10@motorola.com>
Reviewed-on: https://gerrit.mot.com/2131504
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: gaoyx9 <gaoyx9@motorola.com>
Submit-Approved: gaoyx9 <gaoyx9@motorola.com>
Tested-by: gaoyx9 <gaoyx9@motorola.com>
Reviewed-by: Minghui Wei <weimh1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
For each project has its own reserve gpio list. So we should have
the way to distinguish it in every different products.
We use a macro definition for this. If the gpios are not assigned to
TZ, they should be removed from the list.
Change-Id: I0837a3abdf8d7398aa2e7138563cb891b9f53780
Reviewed-on: https://gerrit.mot.com/2121376
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
For Rhode5gp project,
Move SPI to GPIO from TZ to HLOS , refer to this change :
https://gerrit.mot.com/#/c/2119002/
wt6670f irq pin use gpio56,
Display use gpio46 to enable VCI.
Charge use gpio45 , gpio57
so remove gpio45/46/56/57 reserved from HLOS
Change-Id: Iadc24906dcd17ba72d320394fa74824286c4089f
Reviewed-on: https://gerrit.mot.com/2119174
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Remark:
enable Micron hid feature for milan 5G on mot4350 family.
disable for denver,ibiza, cyprus 5G, corfu 5G and rhodep,for
these projetcs not use Micorn uMCP, or the Micron uMCP used is
not support HID feature.
further project if reuse currently baseline need define it accordingly.
Change-Id: I24f2fe21260a4329df3f96f263efd0ba169c0460
Reviewed-on: https://gerrit.mot.com/2099662
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
AW skt5.3.1.1 put skt params in afe side.
can't deal cowork scene.
as KP liyif request.
return back to skt params in acdb method.
and use the latest skt v5.3.0 algo.
delete params from bin config for milanf.
Change-Id: Id0dbdedec26bba231031742853a01655667cadcf
Signed-off-by: liaohj <liaohj@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2113315
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wanlong Zhou <zhouwl@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
